Hello Colleagues
our departmanet has to print Adobe forms which are designed to print upon templates. This is to say the exact position of the boxes, the offset, is determined by a publishing house. These templates can have different offsets. Most of these differences are small (2 mm or so) others can be up to 1 cm. Printing becomes impossible then. In addition there is no rule (the publishing houses can set their own standard). Now we look for a way to dynamically change offset. We had three ideas:
1.) Influence the offset during runtime via Scripting.
2.) Influence the offset by setting the margins of the pages in the Spool.
3.) Influence the offset by introducing a second/third ... Masterpage with different layout-settings.
It seems that possibility No. 3) is the easiest, but would result in a large variety of different Masterpages (in the worst case 1 per publishing house). So I would prefer possibiltiy 1 or 2. I wonder if anyone could give me a hint about how to influence the offset of a Masterpage via Scripting or how to change the margins of the spool during runtime.
Thanks a lot in advance for any tip you have.
Best Regards
Uwe
